Hedland Flowmeter, spring-loaded in-line, for water, 3/4" NPT(M), 1 to 10 gpm

Catalog # MFLX03231-27

Supplier: Avantor Fluid Handling

Catalog # MFLX03231-27

Supplier: Avantor Fluid Handling

About this item

Provide accurate readings while mounted in any position.

Rugged design resists shock and vibration
Control pumps or valves with an optional limit switch

These economical flowmeters are built with a spring-retained piston for direct, accurate readings regardless of the position you mount them. Use them to monitor hydraulic systems or chemical processes; the meters also work well to check pump and control valve performance.

Note: Polysulfone is not suited for direct contact with sunlight.

Considering limit switches? Use to provide an output signal at a setpoint anywhere between 0 to 100% of full-scale. Use to control small pumps, valves, or alarms or to interface with a PLC.

Maximale Durchflussrate:
35 L/min (10 gal./min)
Min. Durchflussrate:
4 L/min (1 gal./min)
Genauigkeit:
±5% full-scale
Max. Druck:
325 psi
Bezeichnung:
Flowmeter, spring-loaded in-line, for water, 3/4" NPT(M), 1 to 10 gal./min
Environmentally Preferable:
Float material:
316 Stainless Steel
O-Ring material:
Buna N
Pressure drop at max. flow:
3 psid
Max. Betriebstemperatur:
121 °C (250 °F)
Höhe:
8,25"
Reproduzierbarkeit:
±1%
Garantie:
1 year
VE:
1
Gehäusematerial:
Polysulfone
Fitting material:
Polysulfone
Fluid type:
Water
Process connection:
0,75" NPT(M)