Accessories for glove boxes, Precise™
Anbieter: LABCONCO
Springe zu:
Über diesen Artikel
40 Optionen unten verfügbar
Product Details & Documents
Product Family Options
Evacuation and filling
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- Automatic pressure controller for 230 V units, incl. mounting bracket, hardware, 3/16" ID polyvinyl tubing, 3/32" ID polyvinyl tubing, and power cord, for automatic control of the main chamber pressure, main chamber purging and filling cycles, and transfer chamber evacuation and filling cyclesEinloggen für Verfügbarkeit1 * 1 ST11 390,00 €
- Manual valve gas and vacuum tubing connection kit, with flexible vinyl tubing and fittings necessary to connect user-supplied inert gas supply tank and rotary vane vacuum pump to valves located on the glove boxEinloggen für Verfügbarkeit1 * 1 ST361,00 €
- Gas and vacuum tubing connection kit, automatic pressure controller, with flexible vinyl tubing and fittings necessary to connect user-supplied inert gas supply tank and rotary vane vacuum pump to valves located on the glove boxEinloggen für Verfügbarkeit1 * 1 ST396,00 €
- Add-A-Valve kit, incl. manual ball valve, compression fitting, hose connector fitting, O-ring and nut to add a service valve to the main chamber or transfer chamber; requires installation and Ø 0,688" holeEinloggen für Verfügbarkeit1 * 1 KIT538,00 €
Pressure relief
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- HEPA-filtered pressure relief vent kit, with 99,99% efficient HEPA filter; for ducting to the outside or room; may be used with 5241200 carbon-filtered vent kitEinloggen für Verfügbarkeit1 * 1 ST1 620,00 €
- Carbon-filtered pressure relief vent kit, incl. activated carbon filter, for ducting to outside or room; may be used with 5238500 HEPA-filtered pressure relief vent kitEinloggen für Verfügbarkeit1 * 1 KIT2 730,00 €
- Pressure relief valve vent kit for exhaustig the pressure relief valve during overpressurization, incl. 3,9" OD × 3,8" ID thimble connection, gasket, two elbows, four clamps and 13" long tubing (Ductwork for outside venting and 5230600 Pressure Relief Valve are required but not included)Einloggen für Verfügbarkeit1 * 1 ST798,00 €
Moisture and oxygen monitoring
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- Moisture monitor/hygrometer for placement inside the main chamber to continuously monitor moisture levels and absolute moisture content in gas (0 - 10000 ppm); consists of chemically inert ceramic technology moisture sensor, sampling block, digital display monitor, sampling pump, switching power supply and on/off switch, for 230 V unitsEinloggen für Verfügbarkeit1 * 1 ST14 270,00 €
- Digital hygrometer, handheld, measures both percent relative humidity from 0-100% and temperature in ° F/° C; incl. 9 volt alkaline batteryEinloggen für Verfügbarkeit1 * 1 ST2 920,00 €
- Oxygen monitor, dor detecting trace oxygen levels using an electrochemical sensor; digital readout in three measurement ranges of 0-100 ppm, 100-1000 ppm and 1000-10000 ppm, for 230 V unitsEinloggen für Verfügbarkeit1 * 1 ST12 960,00 €
- Oxygen monitor for 115/230 V, measures percent of oxygen (0,1 - 100 %) inside the glove box using a chemically resistant electrochemical sensor, incl. interconnecting sensor cable and power cord for connection to the glove box’s interior electrical receptacleEinloggen für Verfügbarkeit1 * 1 ST4 040,00 €
- Exterior oxygen monitor tubing kit (For use with Oxygen Monitor 5244500 and 5244501)Einloggen für Verfügbarkeit1 * 1 ST361,00 €
- Exterior oxygen monitor tubing kit (For use with Moisture Monitor 5244900 + 5244901)Einloggen für Verfügbarkeit1 * 1 ST361,00 €
Low oxygen and moisture level removal
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- Oxygen and moisture removal column, for reduceing the oxygen level to less than 5 ppm and moisture level to less than 50 ppm; requires connection to two manual valves on the main chamber and a diaphragm vacuum pump for atmosphere oxygen/moisture removal and recirculationEinloggen für Verfügbarkeit1 * 1 ST4 350,00 €
- Oxygen and moisture removal tubing kit, incl. 25' fluorinated ethylene propylene (FEP) tubing, eight tube inserts and two connectors to connect the Oxygen and Moisture Removal Column to diaphragm pumpEinloggen für Verfügbarkeit1 * 1 ST875,00 €
Drying train accessories
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- Canister with stand for holding any trap insert, clear polypropylene canister allows visual inspection of trap contentsEinloggen für Verfügbarkeit1 * 1 ST721,00 €
- Drying train tubing kit, incl. 25' fluorinated ethylene propylene (FEP) tubing and eight tube inserts to connect drying train componentsEinloggen für Verfügbarkeit1 * 1 ST645,00 €
- Flowmeter, for inline drying train connection to provide visual confirmation of drying train circulationEinloggen für Verfügbarkeit1 * 1 ST
- Gas and vacuum 0,2 µm filter, traps particulates; for drying train or vacuum pump exhaust; 0,25" - 0,38" IDEinloggen für Verfügbarkeit1 * 1 KIT674,00 €
- Diaphragm pump for drying train circulation, for 230 V units, 35 l/minute displacement capacityEinloggen für Verfügbarkeit1 * 1 ST2 670,00 €
- Drying train, with 1 molecular sieve column, 220 V, 50/60 HzEinloggen für Verfügbarkeit1 * 1 ST5 940,00 €
- Drying train, with 2 molecular sieve columns, 220 V, 50/60 HzEinloggen für Verfügbarkeit1 * 1 ST8 570,00 €
General accessories
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- Flat work surface, black epoxy resin, may be placed atop two Protector Standard Base Cabinets to support Precise™ glove boxes, 1524×762×31,75 mmEinloggen für Verfügbarkeit1 * 1 ST
- Electrical pass-through kit, provides a leak-tight connection for data transfer to a printer or computer; incl. sealed 9 pin connector (D-subminiature with male pins on one side and female pins on the other) and 10' cord; requires installation and drill hole; Installation Kit 5241100 is recommendedEinloggen für Verfügbarkeit1 * 1 KIT292,00 €
- Electrical power strip, UK-plug, 250 volts, 2 amps, 6 receptaclesEinloggen für Verfügbarkeit1 * 1 ST609,00 €
- Ionizer fan, anti-static, for 230 V units, 50/60 Hz operationEinloggen für Verfügbarkeit1 * 1 ST2 480,00 €
- Viewing window, acrylic (749×396×12,7 mm) with dry powder epoxy-coated steel frame, replaces standard laminated glass windowEinloggen für Verfügbarkeit1 * 1 ST1 220,00 €
- Electrical 9-Pin Pass-Through installation kit, incl. drill bits and holesaws for installing 5075619 Electrical 9 Pin Sealed Pass-ThroughEinloggen für Verfügbarkeit1 * 1 ST288,00 €
- Electrical power strip, EU-plug, 250 volts, 2 amps, 4 receptaclesEinloggen für Verfügbarkeit1 * 1 SET591,00 €
Storage accessories
Produktinformationen
- BezeichnungVerfügbarkeitPreis
- Bottle holder, epoxy-coated steel, with 3" diameter opening, holds a squirt bottle or other round containerEinloggen für Verfügbarkeit1 * 1 ST111,00 €
- Tissue holder, epoxy-coated steel, accommodates a box of tissues in the upside down or upright position; opening in the holder permits wipes to be dispensed from the bottomEinloggen für Verfügbarkeit1 * 1 ST160,00 €
- Rear shelf kit, incl. four stainless steel shelves and epoxy-coated steel vertical uprights, with stainless steel slotted back for mounting Hanging Shelf Kits (sold separately); assembled dimensions: 563,88×508×111,76 mmEinloggen für Verfügbarkeit1 * 1 ST757,00 €
- Left side shelf kit, incl. four stainless steel shelves and epoxy-coated steel vertical uprights, for storage in left side of the main chamber to maximise space; assembled dimensions: 538,48×508×111,76 mmEinloggen für Verfügbarkeit1 * 1 ST721,00 €
- IV bar kit for supporting intravenous solution bottles and bags, incl. 21.2" long stainless steel bar, mounting hardware and four snap hooks; requires Shelf Kit 5235000 or 5235001 (not included)Einloggen für Verfügbarkeit1 * 1 ST237,00 €
- Exterior transfer chamber shelf, dry powder epoxy-coated steel shelf, 271,78×383,54, for mounting to top of transfer chamber to maximise exterior work areaEinloggen für Verfügbarkeit1 * 1 ST177,00 €
- Hanging organizer bin (137,16 mm), plastic, container holds miscellaneous small itemsEinloggen für Verfügbarkeit1 * 1 ST12,20 €
- Hanging organizer bin (187,96 mm), plastic, container holds miscellaneous small itemsEinloggen für Verfügbarkeit1 * 1 ST18,60 €
Methanol ≥99,8%, HiPerSolv CHROMANORM® Reag. Ph. Eur., Gradienten-Qualität für die HPLC
#: 20864.320
Lieferant: VWR Chemicals
Acetonitril ≥99,9%, HiPerSolv CHROMANORM® für die LC-MS, geeignet für UPLC/UHPLC-Instrumente
#: 83640.320
Lieferant: VWR Chemicals
Acetonitril ≥99,9%, LiChrosolv® Reag. Ph. Eur., Gradienten-Qualität für die Flüssigchromatographie, Supelco®
#: 1.00030.2500
Lieferant: Merck
Natriumhydroxid 0.1 mol/l (0.1 N) in wässriger Lösung, AVS TITRINORM Reag. Ph. Eur. volumetrische Lösung
#: 31770.294
Lieferant: VWR Chemicals
Wasser, HiPerSolv CHROMANORM® für die LC-MS, geeignet für UPLC/UHPLC-Instrumente
#: 83645.320
Lieferant: VWR Chemicals
Pufferlösungen, gebrauchsfertig, Referenztemperatur 20 °C, Certipur®, Supelco®
#: 1.09439.1000
Lieferant: Merck