Supplier: Avantor Fluid Handling

Particles will not cause damage.

Supplier: ENTEGRIS

These components are constructed of high purity PFA and PTFE materials for wetted parts and PVDF, PEEK™ and PTFE u-cup with Viton® energizer for non wetted parts.

Supplier: ENTEGRIS

This 3-way valve (patent-pending) has an all-PFA valve body and high purity fluoropolymer wetted components providing a noncontaminating fluid stream and chemically compatible construction. Compliant to SEMI Standard F57-0301, the specification for polymer components used in ultrapure water and liquid chemical distribution systems.

Supplier: ENTEGRIS

O-ring free design, ¹/₂ or ¹/₄" orifice.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Valve design allows ultrapure water to continuously bypass the diaphragm, eliminating water stagnation and bacteria formation in the valve. Manually adjustable, integral needle valve provides precise control of bypass flow.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Three-ported directional valve enables simplification of piping system design while minimising its footprint. All PFA wetted surfaces for ultrapure and corrosion resistant performance.

Supplier: Bohlender

Bestehend aus Schraubkappe aus PPS passend für GL-Gewinde, PTFE/Silikon-Dichtung und austauschbarer Filter-Membrane aus PTFE. Filtermembrane (2 µm) aus PTFE.

Supplier: Avantor Fluid Handling

PTFE wetted parts allow for maximum chemical resistance.

Supplier: Avantor Fluid Handling

Easily control flow with PFA needle valves.

Supplier: Avantor Fluid Handling

Offer outstanding potential for precision control in liquid and gas analysis.

Supplier: Avantor Fluid Handling

No worrying about reliability—longest life available.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Higher performance with greater back (outlet) pressure capability. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: Welch by Gardner Denver

These fine vacuum ball valves feature a small flange made of nickle plated aluminium.

Supplier: Welch by Gardner Denver

These ball check valves have a PTFE hollow ball and viton seals.

Supplier: VACUUBRAND

Gas inlet valves are small hand operated valves for admitting gases into a vacuum system.

Supplier: Welch by Gardner Denver

These manually operated butterfly valves are made of stainless steel with viton seal.

Supplier: USBECK Laborgeräte

Outlet valve with M10×1 outside thread.

Supplier: Bohlender

Body made of PTFE with 2 connections and nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: KARTELL

PP, transparent. Verhindern Druckabfall oder Rückfluss. Maximaler Arbeitdruck 2 Bar und minimaler Arbeitsdruck 0,07 Bar bei Raumtemperatur (20 °C).

Supplier: IDEX RHEODYNE

Combine MX Series II™ modular valves with an instrument currently in use to support complex fluid switching and sample injection needs.

Supplier: HAMILTON BONADUZ

HV plug valves provide an economical and flexible method of custom-building a fluid flow control system, from a simple on/off valve to a more complex multi-valve arrangement, using a combination of loop and distribution valves.

Supplier: HAMILTON BONADUZ

This MTB sampling valve is a lever-actuated on/off valve used for storing and transporting samples in any Gastight® PTFE Luer lock (TLL) or Luer tip (LT) syringe.

Supplier: IDEX RHEODYNE

Anwendbar für Anwendungen wie Probeninjektion, Säulenwechsel und Probenanreicherung.

Supplier: BROEN-LAB

Thermostatische Mischventil für Augenduschen zur Abgabe von lauwarmem Wasser (20 - 25 ° C).

Supplier: JUSTRITE MANUFACTURING

These safety drum vents provide automatic pressure relief for drums between 0,20 bar but less than 0,55 bar. Depending on the model, vacuum relief is either automatic (on horizontally installed vents) or manual (on vertically installed vents).

Supplier: Thermo Fisher Scientific

These vacuum check valves with positive connector are designed to prevent back pressure with aspirator-type vacuum pumps.

Supplier: Welch by Gardner Denver

Small flange valve, open type, made of nickel-plated aluminium.

Supplier: Bohlender

Two-way valve with straight bore and two connections with GL thread completely made of PTFE.

Supplier: IDEX RHEODYNE

Rheodyne®, 7060 6-Wege-Schaltventil mit 6 Positionen und 7 Ports, 10-32-Ports für Kapillaren mit 1/16" AD, 0,4 mm Ø des Statordurchgangs, Edelstahl

Supplier: IDEX RHEODYNE

Manuelle Injektionsventile besitzen zwei mögliche Positionen: Laden und Injektion. Die Ladeposition erlaubt das Beladen der Probenschleife bzw. der Probenkammer mit der Probe. Zum Beladen des Injektionsventils wird gewöhnlich eine Spritze verwendet. Nach dem Laden wird der Griff des Probeninjektors von Hand in die Injektionsposition gedreht, damit die Probe auf eine Säule aufgebracht werden kann.