You searched for: Chromatographie-Zubehör

Supplier: Agilent

Intuvo Flow Chips are modular, microfluidic components that create connections between the inlet, column, and detector(s) without the need for ferrules, and can be easily swapped in minutes.

Supplier: Agilent

Inert kit for ICP-MS enables analysis of high-purity and HF-containing samples using a PFA-based sample intro system with inert Pt or sapphire-injector torch.

Supplier: Agilent

The 4100/4200 Microwave plasma-atomic emission spectrometer runs entirely on air, which means your lab can eliminate flammable and expensive gases. It's safer and more cost efficient than other spectrometers. The 4100/4200 MP-AES enables superior detection and can perform unattended multi-element analyses.

Supplier: Agilent

Agilent uses high-quality graphite and applies stringent quality controls to ensure contamination free and consistency of our contact cylinders for your PerkinElmer graphite furnace AA system. The standard THGA graphite contact cylinders, feature a modified injection port area that helps to minimise condensation and improve analytical performance with difficult matrices. The HGA contact cylinders have shaped graphite contacts to completely encase the graphite tube, ensuring the tube is positioned in a defined environment for uniform radiation conditions.

Supplier: Agilent

Needle

Supplier: Agilent

6 ml vials

Supplier: Agilent

CrossLab, Silicone O-ring

Supplier: Agilent

Split trap vent replacement kit (2 filters and 4 O-rings)

Supplier: Restek

For use with Parker Balston® zero air generators.

Supplier: Restek

These Vu-tight Direct injection (DI) liners are suitable for 6,35 mm packed injection port conversion. They are available in two designs and fit 0,32 and 0,53 mm ID capillary columns (column outer diameter from 0,5 mm to 0,8 mm).

Supplier: Restek

Replacement parts for Thermo separation HPLC systems.

Supplier: Restek

FID maintenance kits for use with Agilent 6850, 6890, and 7890 GCs.

Supplier: Restek

These adapters are made of high quality stainless steel.

Supplier: Agilent

These PEEK sample loops are inert to most organic solvents. The stainless-steel sample loops are not interchangeable due to the change in port angle.

Supplier: Restek

This HPLC PEEK performance kit is a useful complement for the HPLC system.

Supplier: Restek

The oven sensors works in conjunction with the oven control board to regulate oven temperature.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-MS.

Supplier: Agilent

High quality Speciation Columns used as replacements and accessories in the ICP-MS systems portfolio.

Supplier: Agilent

These torch supplies are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: VARIAN

The Programmable Sample Dispensers (PSD) are high-capacity autosamplers that are used with Graphite Furnace AA.

Supplier: Agilent

The Agilent sampling probe is equivalent to the PerkinElmer AA version, and is robust in daily use.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Agilent

These pistons are made from a high purity, mono-crystalline sapphire for maximum durability.

Supplier: Agilent

Agilent burner components for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Agilent

Key design features of nebulisers for PerkinElmer ICP-MS systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

In 2005, Agilent released an improved FPD with minimum detectable levels (MDL) of 3,6 pg/s for sulphur and 60 fg/s for phosphorus. This is more than a five times improvement for sulphur.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Restek

Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 method 3545 and pressurised fluid extraction (PFE).

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.