Ihre Suche nach: Chromatographie-Zubehör

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: Agilent

Diese Gasleitungsversorgungen verleihen selbst den grundlegendsten ICP-MS-Systemkalibrierungen Stabilität und Funktionalität.

Supplier: Restek

Flow splitters with fluid resistor technology eliminate the adjustments to the capillary tubing for optimising split ratio with wide range of interchangeable resistors.

Supplier: VARIAN

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

Before ordering parts for FID maintenance, determine which type of FID is installed on your GC. The FID is available in two versions: Dedicated, capillary optimized: for capillary columns only. Adaptable: for packed or capillary columns.

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890/7890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Restek

These liners can be used with Agilent GCs.

Supplier: Agilent

O-ring, Viton

Supplier: Agilent

Filter for solvent

Supplier: Restek

These liners are made up of borosilicate glass and intermediate polarity deactivated.

Supplier: VARIAN

These deactivated injector liners are optimised for sensitive and reproducible analysis.

Supplier: Agilent

NPD blos bead

Supplier: Agilent

Purge valve actuator, Für: 1120 pump

Supplier: Restek

Replacement parts for Shimadzu HPLC systems.

Supplier: Agilent

Capillary column installation kit with diamond-tipped cutting pencil

Supplier: Restek

This kit is used exclusively with Agilent 5890 GCs.

Supplier: Restek

Caps features a smooth inner surfaces for easier cleaning. Suitable for for ASE systems.

Supplier: Restek

This heater cartridge and PRT sensor can be used with 5890 FID and split/splitless weldments.

Supplier: Agilent

Diese Zubehörteile für Zünder entsprechen den PerkinElmer ICP-OES-Versionen und bieten somit absolute Zuverlässigkeit.

Supplier: Agilent

These torches are suitable for PerkinElmer ICP-MS systems.

Supplier: Agilent

A range of vacuum pump supplies is available to ensure the accuracy and performance of your ICP-MS vacuum system.

Supplier: Agilent

These sample introduction supplies are equivalent to PerkinElmer AA supplies, so you can be confident that they will integrate seamlessly with PerkinElmer AA system.

Supplier: Restek

This split/splitless injection port changes inlet liners faster and more easily.

Supplier: Agilent

Agilent supplies are equivalent to PerkinElmer AA supplies, so you can be confident that they will integrate seamlessly with your PerkinElmer system.

Supplier: Agilent

A range of high quality supplies and components for the Integrated Sample Introduction System (ISIS) for use with the 7700 ICP-MS range.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.