Ihre Suche nach: Mineralölindustrie-Standards

Supplier: Restek

These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.

Supplier: Restek

The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).

Supplier: Merck

Cetane Number standard, 52,6, Supelco®, ASTM D 613

Supplier: Restek

Confirms unleaded gasoline TPH, BTEX and aromatics in single analysis.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

The mix consists of diesel fuel #2 composite, unleaded gasoline composite.

Supplier: Restek

A mineral oil-based transformer oil (Exxon® Univolt® N-61), which has been tested to ensure it is PCB-free.

Supplier: Merck

Acidity standard, Supelco®, (0.0083 mg KOH/g), ASTM D 3242

Supplier: Restek

D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.

Supplier: Merck

Flash point standard, COC, Supelco®, Flammpunkt: 256,8 °C, ASTM D 92

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

Supplier: Restek

The weathered materials indicate the percent weight loss from the original material. Prepared from a single source (one refinery) product.

Supplier: Restek

It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.

Supplier: Restek

The mix consists of, acenaphthene, 2-methylnaphthalene, acenaphthylene, fluorene, naphthalene, 1-methylnaphthalene and phenanthrene.

Supplier: Merck

Aniline point standard, Supelco®, ASTM D 611

Supplier: Restek

The mix consists of diesel fuel #2 composite, unleaded gasoline composite.

Supplier: M S A

Die Gasmischung im Kalibriergaszylinder ist für die gravimetrische Kalibrierung mittels auf NIST rückführbaren Gewichtssätzen zertifiziert. Auf dem Zylinder sind die Chargennummer und der Nominalwert der Gasbestandteile in Form von Menge, Masseprozent, PPM oder Volumen aufgeführt.

Supplier: Restek

The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.

Supplier: Merck

Cloud point standard, Supelco®, ASTM D 2500; NF EN23015

Supplier: LGC Standards PROMOCHEM

This reference or calibration standard is intended for use in the determination of soot in diesel motor oil by infrared spectroscopy and other technique.

Supplier: Restek

The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: LGC Standards PROMOCHEM

This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.

Supplier: Merck

Pour point standard, Supelco®, IP15, ASTM D97, ISO 3016, BS 2000, Pt 15

Supplier: Merck

Fuels Testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption ASTM D1319.

Supplier: Merck

These UKAS certified standards are specifically designed to be used for regular instrument performance checks.

Supplier: Merck

Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks.