Supplier: Bel-Art Products, a Part of SP

These HDPE sheets can be cut, sawed, formed, machined and welded to fabricate special items.

Supplier: MACHEREY-NAGEL

These papers are made hydrophobic (impermeable to water) by impregnation with a silicone. With the aid of these filters, water can be separated from water-immiscible organic solvents in an elegant manner, by means of a simple filtration.

Supplier: Restek

Install an indicator after the Click-On in-line gas filter so there is no confusion about when to replace the traps.

Supplier: UPCHURCH SCIENTIFIC

These filters are ideal for higher pressure applications and to help prevent particulate contamination.

Supplier: VICI JOUR RESEARCH

Diese Filter aus Edelstahl 316L schützen das HPLC-Rohrleitungssystem vor kleinen Partikeln in der mobilen Phase.

Supplier: VICI JOUR RESEARCH

The No-Met polyethylene filter is designed for applications involving the separation of biomolecules, with inert polymeric fittings for 1/8" tubing and a 20 µm filter effectively eliminating metal contamination from the fluid path.

Supplier: Sartorius

Hydrosart® membranes are stabilised cellulose based membranes that have been optimised for the biotechnological and pharmaceutical industry. It is a stable polymer that features a broad pH range. Hydrosart® is also extremely hydrophilic, making it non-protein binding, virtually non-foul and has extremely high flux. Membrane regeneration, storage and depyrogenation can be accomplished by using NaOH even at elevated temperatures. These features make Hydrosart® an ideal membrane for biological applications.

Supplier: AQUADEM

These cartridges are compatible with the Compact water purification units.

Supplier: MACHEREY-NAGEL

Paper chromatography is the chromatographic technique separation due to partition of the analytes between special paper grades and the mobile phase, which penetrates the paper by capillary action ascending, descending and circular techniques are possible.

Supplier: THERMO NATIONAL SCIENTIFIC

These syringe filters have a PP housing.

Supplier: Hach

These membrane filters are ideal for filtration of total and fecal coliforms, E. coli, Streptococcus species, heterotrophic bacteria and fungi.

Supplier: Ahlstrom-Munksjö

This syringe filter with hydrophilic polyamide membrane is used for sterilisation and clarification of biological fluids, buffer solutions and tissue culture medias. Also suitable for filtration of aqueous and organic solutions in HPLC.

Supplier: Restek

Packed with an extremely high surface area, baked coconut shell based activated carbon.

Supplier: Restek

This gas management system removes moisture, hydrocarbons, and oxygen from carrier gas, extending column lifetime.

Supplier: Agilent

Oxygen/moisture traps have two functionalities in the same trap. These traps are disposable. In addition to inert gases (nitrogen, helium, argon and krypton), the Agilent OT3 trap treats streams of hydrogen, alkanes, alkenes, aliphatic hydrocarbon gases, low boiling aromatics, carbon dioxide, carbon monoxide, and argon-methane.

Supplier: SciLabware

These filter tubes can be used for small scale filtrations. They are ideal for use with Pyrex® short stem funnels.

Supplier: Restek

This trap removes hydrocarbons and other contaminants. It fits in GC oven for easy thermal recharging.

Supplier: Restek

This thermal gas purifier removes oxygen, water, carbon monoxide, carbon dioxide, hydrocarbons (except methane) to ppb levels which is pure enough for MS.

Supplier: Agilent

Activated hydrocarbon trap packed with activated charcoal, should be used mainly for removing the trace amounts of hydrocarbons and organics from
carrier gases. Water and other contaminants, which cannot be trapped by the activated charcoal, may be removed by a Molecular Sieve 5A trap.

Supplier: Ahlstrom-Munksjö

These syringe filters with PP housing contain prefilters specifically developed to increase the efficiency of laboratory microfiltration applications by reducing the number of steps needed to process samples and solutions with either a high particle load or a high viscosity if standard syringe filters are used.

Supplier: Hach

These GN-metrical membrane filters are ideal for testing recreational water, wastewater and drinking water. They meets U.S. Environmental Protection Agency (USEPA) and American Society for Testing and Materials (ASTM) specifications to ensure complete retention and maximum recovery of bacteria.

Supplier: Agilent

Captiva filter cartridges with standard SPE format which are ideal for LC/MS samples.

Supplier: Restek

CarboFrit™ plugs are specifically designed to be slightly larger in OD than the 4 mm ID of glass liners. This allows the plug to conform to the ID of the glass liner, preventing voids in the packing.

Supplier: THERMO NATIONAL SCIENTIFIC

The Target® syringe filters are ideal for general purpose laboratory use. Target2® GMF (Glass MicroFiber) syringe filters are used for dissolution testing. They are also well-suited for general filtration applications.

Supplier: EVOQUA WATER TECHNOLOGIES

Filterkartusche, Ultra Clear™, Vorbehandlungskartusche AMB

Supplier: Bohlender

Filterscheibe aus porösem PTFE.

Supplier: Merck

Durapore® Millipak® Final Fill Capsules

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Filterkartusche, Typ: Entionisiererkartusche, Aquadem DL 2

Supplier: Restek

This molecular sieve S-trap is suitable for traping water vapour and also increases column and oxygen trap lifetime.

Supplier: Merck

The Viresolve^® pro solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.