Ihre Suche nach: Filter

Supplier: Merck

Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

Supplier: Merck

Ultrafiltration membranes - Amicon™ XM polyacrylonitrile/PVC co-polymer filters. High-recovery membranes for stirred cells.

Supplier: ENTEGRIS

This cartridge filter with high flow and efficient particle removal, ensures rapid particle removal in one-pass and recirculating applications. It eliminates the trace levels of ions and improves the quality of ultrapure water.

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: Merck

Ultrafree®-MC centrifugal devices are single-use, disposable PP filters used for removing particulates from aqueous biological solutions. Devices are available with a range of microporous membranes for fast filtration and highly reproducible performance.

Supplier: ENTEGRIS

Photochemical filter with superior contaminant retention and low hold-up volume performance in sub-10 to 180 nm technology nodes.

Supplier: ENTEGRIS

These cartridge filters have superior retention efficiency with rapid particle removal and microbubble control which facilitates faster bath startup and system qualification.

Supplier: Merck

These centrifugal filter units can be used for a number of applications, including removal of particles and precipitates from aqueous and some solvent-based samples. Ideal for use with protein and nucleic acid solutions.

Supplier: VWR Collection

Einsatz und Auffangröhrchen aus PP MWCO-Filter sind Ideal für Konzentration, Aufreinigung und Entsalzung von Peptiden, Proteinen, Oligonukleotiden, DNA und RNA.

Supplier: Merck

Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility.

Supplier: G-Biosciences

These disposable spin columns are designed for protein purification. These spin columns are uniquely designed, with a snap off end converting to a closure for the column for easy manipulation and use.

Supplier: ENTEGRIS

Diese Point-of-Use-Filter erfüllen die Anforderungen kleiner bis mittelgroßer photochemischer Filtrationen für Anwendungen mit Positiventwicklern und entionisiertem Wasser. Sowohl die Optimizer® DEV Filter (für Anwendungen mit Entwicklern) und die Optimizer® DI Filter (für Anwendungen mit entionisiertem Wasser) erfordern kein Befeuchten, sodass die Filter unmittelbar nach der Installation funktionieren. Das Design schränkt zudem den Umgang mit gefährlichen Chemikalien während der Installation ein und fördert einen gesünderen Arbeitsplatz. Verwenden Sie keinen der beiden Filter mit aromatischen Kohlenwasserstoffen.

Supplier: Cytiva (Formerly Pall Lab)

The Pall Nanosep device for nucleic acid binding (NAB) incorporates a dual layer silica-based quartz glass fiber media to allow for efficient binding of DNA and RNA, while providing smooth flow and rapid processing of samples.

Supplier: Merck

These centrifugal filter units can be used for a number of applications, including removal of particles and precipitates from aqueous and some solvent-based samples. Ideal for use with protein and nucleic acid solutions.

Supplier: ENTEGRIS

The point-of-use photochemical filters with superior contaminant retention and low hold-up volume performance in sub-10 to 180 nm technology nodes. Both Optimizer® D300 and D600 filters are geared to small-volume filtration of photoresists, resist dielectrics, and solvents. It requires no pre-wetting, so the filters function immediately after installation. Without the need for prewetting, they reduce the likelihood that microbubbles will form and avoid the problems associated with incomplete wetting and the mixing of incompatible chemicals.

Supplier: Merck

The Stericap™ PLUS Universal bottle-top filter device with Millipore Express® PLUS membrane provides fast vacuum filtration and low protein binding without the need for a prefilter in most cases. It filters quickly, without clogging, even viscous solutions typical of serum-containing media. This non-cytotoxic, non-pyrogenic device can be used to fill any vacuum-rated bottle or other container with an inner neck diameter of 20 to 67 mm. This allows maximum versatility, capacity, speed, and flowthrough efficiency when you need to filter larger volumes into containers with openings of various sizes.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: ENTEGRIS

Microgard UPE/UPX filters do not require prewetting with solvent-based photochemicals. All PE construction lowers metallic and ionic contamination that can leach from filters that are manufactured with materials such as PP and nylon.

Supplier: ENTEGRIS

Liquid photochemical filters designed for developer, DI water and solvent applications in POU photolithography processes.

Supplier: ENTEGRIS

Diese Filter sind für den Bedarf an photochemischer und Lösungsmittelfiltration kleiner bis mittlerer POU-Mengen konzipiert. Sie können zur hydrophoben Filtration von Fotolacken, Verdünnern und Lösungsmitteln eingesetzt werden.

Supplier: Epredia

Highly absorbent disposable filter cards for use with TPX chamber.

Supplier: ERLAB CAPTAIRE

HEPA-Filter für 834/1634, Für: Pulver

Supplier: Merck

The Steriflip® filter unit performs vacuum assisted, closed system ensures sample sterility while enabling fast separation of large volumes of cellular material for efficient recoveries. It also eliminates messy pouring during sample transfer. Filters come in different pore sizes that are ideal for cell isolation.

Supplier: Whatman products (Cytiva)

These 934-AH™ RTU grade filter papers have been pre-washed, dried (or ignited), cooled, desiccated and weighed, which eliminates the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These filter papers are widely used for dissolved, suspended and volatiles solid analysis. They are also used as a wastewater filter for a wide range of water monitoring applications including the monitoring of rivers, lakes and coastal waters, as well as analysing purified discharge of wastewater treatment plants and monitoring discharge water from industrial plants.

Supplier: Whatman products (Cytiva)

Grade GF/A card-mounted filters are used in static sample and personal air sampler applications. These aerosol sampling and particulate monitoring filters provide high flow rates and minimal sample interference.

Supplier: Merck

Precolumn filter kit has a standard 10-32 fitting and fits direct to most column types without introducing an additional dead volume.

Supplier: Cytiva (Formerly Pall Lab)

Ideal zur Belüftung von Bioreaktoren, Fermentern und Ballonflaschen. Sterile Gasreinigung von Kulturgefäßen. Ideal zum Anbringen an Einwegsystemen, die einer Gammabestrahlung unterzogen werden müssen.

Supplier: VWR Collection

Binder-free glass fibre filters feature fast flow rates, high loading capacity, wide thermal tolerance and excellent precipitate retention.

Supplier: Merck

Vacuum filtration system for sample preparation for HPLC. Samplicity® G2 filtration system enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.

Supplier: Thermo Fisher Scientific

Hydrophilic PES membrane, PS graduated housing. Ideal for biological and pharmaceutical sterilisation requirements. Universal tissue culture membrane with lowest protein binding and extractables. Rapid-Flow™ filters with 0,2 µm PES membranes are STEM CELL TESTED.